Solution To Bottle Making

Solution To Bottle Making
Chat Now
Product Details

Solution of bottle blowing line:

Complete Bottle Production Line:

According to different production requirement, there are different equipping solution and follow are two main solutions for production line:

Solution One:

A. MG-5IIB Bottle Blower

B. SMPH-10 Preform Reheater

C. STA155 (1.2/30)

. . High-pressure Air Compressor

D. 0.6/40 Air Tank

E. C-001 Air Filter r 

F. JCD-10SG Air Drye

G. T-001 Air Filter

H. A-001 Air Filter

I. .H-001 Air Filter . 

J .Two-cavity Blow Mold 

(Installed inside MG-5IIB )

Main Final Product RangeBottle for Mineral water, Edible oil, Alcoholic drinks, CSD, Soda drinks, Cosmetics, Clean lotion, Detergent, medicine,
Final Product ShapeRound, Square, Oval, Flat, Off center, Petaloid, etc.
Bottle Volume Range50~2000ml
Bottle Neck Finish Range18~38mm
Max Bottle Body Diameter130mm
Suitable Blow MoldTwo-cavity mold
Production Capacity400~850 Bottle/hour (according to different bottle volume)

Solution two:

A1&A2 MG-5IIB Bottle Blower

B. SMPH-10 Preform Reheater

C. STA155 (1.2/30)

. . High-pressure Air Compressor 

E. 0.6/40 Air Tank 

F. C-001 Air FilterG. JCD-10SG Air Dryer 

I. T-001 Air Filter

H A-001 Air Filter

J .H-001 Air Filter . 

K1&K2. .Two-cavity Blow Mold 

(Installed inside MG-5IIB )

Main Final Product RangeBottle for Mineral water, Edible oil, Alcoholic drinks, CSD, Soda drinks, Cosmetics, Clean lotion, Detergent, medicine,
Final Product ShapeRound, Square, Oval, Flat, Off center, Petaloid, etc.
Bottle Volume Range50~2000ml
Bottle Neck Finish Range18~38mm
Max Bottle Body Diameter130mm
Suitable Blow MoldTwo-cavity mold
Production Capacity800~1600 Bottle/hour (according to different bottle volume)

Tinyard Enterprise is one of the top level China solution to bottle making manufacturers and suppliers, welcome to wholesale solution to bottle making from our factory.

Feedback