High Speed Slitting Machine For Paper Straw

High Speed Slitting Machine For Paper Straw
Chat Now
Product Details

FQ-800 Paper Slitting Rewinding Machine for paper straw

slitter-big


FQ-800 Jumbo Paper Slitting Rewinding Machine is widely used in paper production and paper tube/core production.


Features:

1. Double cross blades (top blades and bottom blades) slitting. Cutting edges are more smooth and neat.

 2. Adopt shaftless material loading device, which can bear 2000kgs weight.
 
 3. Pneumatic loading system (Hydraulic can be customized); standard slitting width and diameter is 1200mm

 4. Rewinding side adopted with curved roll and air expanding shaft so that finished rolls can be separated automatically and unloaded very easily.

 4. Both material paper roll loading and finished rolls unloading to finished automatically.


Main technical parameter :

Model  

FQ-800  

Width   of roll material

600mm  

Max.   Diameter of roll material

1000mm  

Max.   Diameter of rewinding roll

600mm  

Min.   Width of slitting

10mm,12mm13mm

Slitting   Speed

0-150m/min  

Total   Power

6.5kw  

Overall   dimension ( L x W x H mm)

2200x2000x1400  

Weight  

2200kg  


slitter-2

Machine   Main Parts :

The   machine with unwinder , web guide , slitting system , rewinding unit   ,transmission system ,electric control part , etc

 

Specification  

1.   Unwinder

A.   The machine with Manual horizontal alignment , Eliminates tension and   wrinkles caused by the thick ends or uneven cores of the raw materials

B.   The high linear magnetic powder brake is used as the unwinding tension   actuator. The output torque is balanced, and the tension fluctuation can be   reduced to the lowest state. The Siemens PLC automatically detects and   calculates the size of the material through online and automatically controls   the unwinding tension output.

C.   Loading Material  pneumatic lift   loading

D.   Air Shaft Unwinder100NM magnetic powder brake tension controlled by PLC

E,   Web Guide Control System

 

2.Slitting System

The   machine uses a round knife to cut, the incision is neat, and the service life   is long. The upper and lower knife axes of the slitting are widened, and the   speeds of the upper and lower knife shafts are matched by the gears. Rotate   the hand wheel to implement the knife, and continue turning to achieve   automatic knife.

A,   Slitting shaft , 1 set Top knife shaft and 1 set bottom knife shaft

B,   Locking device: With a rapid tool setting device, it can lock the upper knife   shaft to avoid cutting quality problems caused by the upper and lower knife   disengagement or movement.

C,   High-pressure fan through the blowing pipe diversion, the waste edge come out  

D,   30MM Main wall plate: The use of steel wall panels, effective damping, to   facilitate the smooth operation of the machine at high speed

E,   φ100×950mm Guide roller: chrome plated, polished

 

3,   Rewinding Unit

A,   This machine adopts two-axis rolling of the left and right axles. It is   equipped with a pressure arm to balance the pressure inside and outside the   winding. The drive adopts two frequency conversion vector motors, the   uniaxial tension is arbitrarily adjustable, and the winding tension increases   with the increase of the winding volume. The winding volume is automatically   calculated by the PLC and the control tension is automatically calculated.

B,   magnetic powder clutch control rewinding steel shaft rewindingand paper core PLC control tension

 

4,   Driving unit

A,   The inverter is used to control the 5.5KW main motor operation, the speed of   the lift is convenient and fast, and the speed adjustment is excessively soft   and steady.

 

5,   Main Electrical Part

A,   Centralized control of the cabinet, beautiful and easy to operate. PLC   automatic tension control

B,   One meter counter , real-time linear speed real-time, meter auto stop   function (with deceleration stop function, remember meter basically no error)  

C,   Button Contactor air switchair

Machine List

Number  

Name  

Part

Quantity  

Brand

1

Unwinder

3   Inches Air Shaft

1pcs  

China  

2

Unwinder   Tension

20kg   Magnetic powder brake

1   Set

China  

3

Main   Motor

5.5KW  

1   Set

Shanghai  

4

Inverter  

5.5KW  

 1 Set

Shenzhen  

5

Web   Guide


1   Set

China  

6

Slitting   knife

Paper   Width 615mm

22   Sets

China  

7

Slitting   knife

Paper   Width 615mm

22   Sets

China  

8

Spacer  

5mm   Spacer, Paper Width 610mm

40Sets  

China  

9

Rewinding   Driving

5kg   Magnetic powder clutch

2   Sets

China  

10  

Rewinding   Contro

PLC   automatic tension control

1   Sets

Siemens  

11  

Rewinding   Air Shaft

3inches  

2   pcs

China  

12  

Waste   edge

FAN  

1   SET

China  

13  

PLC  

Touch   Screen

1   SET

Weinview

14  

Main   Electrical

Button,Contactor,airswitchair

All  

CHINT  

Spare Parts list

Monkey   wrench


1   pc

Ringent   wrench

12×14  

1   pc 

Ringent   wrench

17×19  

1   pc

Ringent   wrench

8×10  

1   pc

Screw   driver

”shape

1   pc

Screw   driver

”shape

1   pc 

Inner   hexagonal wrench


1   pc

Oil   gun


1   pc

slitter

Tinyard Enterprise is one of the top level China high speed slitting machine for paper straw manufacturers and suppliers, welcome to wholesale high speed slitting machine for paper straw from our factory.
Feedback